Dakstra
Sitemap | search
 
Roof windows
Roof windows
Blinds
Blinds
INSTALLATION SEQUENCES JUST FOLLOW THESE STEPS print page

.Accessories
Electrical opener (DP)

Electrical opener (DPX)

Remove striking plate

Please remove the striking plate by removing the one screw

top

Remove handle

Please remove the handle by removing the two screws

top

Measure for fixing plate

Use a pencil to mark the placing of the fixing plate. The marks should be 35 mm from the top of the bottom sash as show in the image

top

top

Predrill holes

Predrill holes for the screws

top

Fix L-brackets

Fix the L-brackets onto the motor as shown

top

top

top

Measure for holes

Please mark where to predrill the holes on the frame

top

top

top

Predrill holes

Please predrill holes to fix the motor

top

Fix the motor

Please fix the motor

top

top

Fix the chain on the fixing plate

Please start by fixing the plate onto the sash and then fix the chain to the plate

top

Motor fixed

This is what a correctly installed motor looks like

top

Control unit

Turn to the control unit. Remove the white top cover

top

Fixing motor to control unit

Take the motor cord and remove covering, so the brown and white wires are visible. Fix the wires into the respective slots on the small unit as shown

top

Cord between control unit and switch

Please find a piece of cord (not included in box) and remove covering, so 3 wires are shown. Place the three wires into the 3 holes as shown. The colors are not important, but the colors on the small unit should correspond with later work on the switch

top

top

Finalise the control unit

Place the small unit in the control unit as shown

top

Fix the cord on the switch

Prepare to insert the 3 wires into the switch. Please place the three wires in the switch as shown. Please compare the wire colours to the split in the actual control unit. Please split the middle wire into two.

top

A job well done!

Fix the wires as shown. The electrical opener can now be tested. When you push both buttons on the switch at the same time the window will stop. You can now fix the control unit and the switch onto the wall.

top

 
 
PRODUCTS | PRACTICAL ADVICE | INSTALLATION | SECURE AREA | SUPPORT | DOWNLOADS
TECHNICAL SPECIFICATION | MAINTENANCE | SITEMAP
  © 2018 Altaterra Kft, H-9431 Fertőd, Malom köz 1. All rights reserved
Terms & conditions / Privacy policy / General Terms of Sale and Delivery
W3C