Dakstra
Sitemap | search
 
Roof windows
Roof windows
Blinds
Blinds
INSTALLATION SEQUENCES JUST FOLLOW THESE STEPS print page

.Accessories
Electrical opener (AA)

Electrical opener (AAX)

Remove the handle

Remove the handle by removing the two screws

top

Remove the striking plate

Remove the striking plate by removing the one screw

top

Placing the motor

Place the motor on the frame, so the chain is right in front of the hole, which was previously used for the handle

top

top

Marking

Use a pencil or the like to mark, where to drill holes for the motor

top

Predrill

Predrill the four holes. Please make sure to use a size of drill that matches the screws

top

Screws and V-brackets

Apply the V-brackets and screws as shown. It is important to use the V-brackets to ensure the motor has the correct angle for operation

top

Fixing the motor

Fix the motor onto the window frame

top

Fixing plate

Remove the screw from the fixing plate

top

Fixing plate onto chain

Add the fixing plate onto the end of the chain (temporarily). This makes it easier to mark the points to drill holes

top

top

Marks for the fixing plate

Use a pencil to mark the placing of the fixing plate. The marks should be 35 mm from the top of the bottom sash as show in the image

top

Predrill

Predrill the two holes. Please make sure to use the correct size of drill matching the screws

top

Fix fixing plate

Fix the fixing plate (without the chain)

top

Fix the chain

Fix the chain to the fixing plate

top

A job well done!

The motor is correctly fixed onto the window frame.

top

 
 
PRODUCTS | PRACTICAL ADVICE | INSTALLATION | SECURE AREA | SUPPORT | DOWNLOADS
TECHNICAL SPECIFICATION | MAINTENANCE | SITEMAP
  © 2009 Altaterra Kft, H-9431 Fertőd, Malom köz 1. All rights reserved / Terms and conditions / General Terms of Sale and Delivery W3C